Diamante V6-3.5L SOHC (2003)
1. Remove sealant from oil pan and cylinder block mating surfaces.
2. Degrease the sealant-coated surface and the engine mating surface.
3. Apply the specified sealant around the gasket surface of oil pan as specified in illustration.
Specified sealant: MITSUBISHI GENUINE PART No. MD970339 or equivalent
NOTE: The sealant should be applied in a continuous bead approximately 4 mm (0.16 inch) in diameter.
4. Assemble oil pan to cylinder block within 30 minutes after applying the sealant.
5. Tighten the oil pan mounting bolt in the order illustrated (left).
