Diamante V6-3.5L SOHC (2003)
Brake Light Switch: Testing and Inspection
STOP LIGHT SWITCH ADJUSTMENT
1) Turn the stop light switch anticlockwise 1/8 turn to release the switch.
2) Push the switch through the retaining clip until the switch plunger body just contacts the brake pedal stopper.
3) Turn switch 1/8 turn clockwise to securely lock the switch.
4) Check to be sure that the stop light is not illuminated with the brake pedal released.
STOP LIGHT SWITCH CHECK
Connect a circuit tester to stop light switch terminals "a" and "b" and check whether or not there is continuity when the plunger of the stop light switch
is pushed in and when it is released.
The stop light switch is in good condition if there is no continuity when the plunger is pushed in to a depth of within 4 mm (0.16 inch) from the outer
case edge surface, and if there is continuity when it is released.
