Diamante V6-3.5L SOHC (2003)
Center Mounted Brake Lamp: Service and Repair
REMOVAL AND INSTALLATION
REMOVAL
1. Insert a clean flat blade screwdriver at the triangle marker position at one side of the lamp as shown in the illustration.
2. Push the screwdriver in until the retainer clip releases from the glass mounting clip and move the lamp toward the rear. Repeat this step at the other
side of the lamp.
3. Disconnect the wiring connector and remove the lamp.
INSTALLATION
1. Connect the wiring connector and slide the lamp onto the glass mounting clip until the retaining clips lock on the glass mounting clips positively.