Diamante V6-3.5L SOHC (2003)
Throttle Position Sensor: Testing and Inspection
Throttle Position Sensor Check
THROTTLE POSITION SENSOR CHECK
1. Disconnect the throttle position sensor connector.
2. Measure the resistance between the throttle position sensor side connector terminal 1 and terminal 4.
Standard value: 3.5 - 6.5 kOhm
Normal Condition
3. Measure the resistance between the throttle position sensor side connector terminal 3 and terminal 4.
4. If the resistance is outside the standard value, or if it doesn't change smoothly, replace the throttle position sensor.
NOTE: For the throttle position sensor adjustment procedure, refer to <Vehicles without TCL>, <Vehicles with TCL>.