Diamante V6-3.5L SOHC (2003)
Fuel Pressure Release: Service and Repair
FUEL PUMP CONNECTOR DISCONNECTION (HOW TO REDUCE PRESSURIZED FUEL LINES)
When removing the fuel pipe, hose, etc., since fuel pressure in the fuel pipe line is high, do the following operation so as to release fuel pressure in the
line and prevent fuel from running out.
1. Remove the rear seat cushion.
2. Remove the fuel pump/fuel gauge floor cover plate and disconnect the wiring connector at the fuel pump/gauge assembly.
3. Start the engine and let it run until it stops naturally, turn the ignition switch to OFF.
4. Re-connect the fuel pump/gauge wiring harness connector.
5. Install the rear seat cushion.
