mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Relays and Modules - Starting and Charging > < Air Bag Control Module|Locations|Page 184
Page 2
background image

<A> NEGATIVE (-) BATTERY CABLE DISCONNECTION

Disconnect the negative battery cable from the battery and tape the terminal.

CAUTION:  Wait at least 60 seconds after disconnecting the battery cable before doing any further work.

WARNING:  Battery posts, terminals and related accessories contain lead and lead compounds. WASH HANDS AFTER HANDLING.

INSTALLATION SERVICE POINTS

>A< SRS-ECU INSTALLATION

CAUTION:  The SRS may not activate if SRS-ECU is not installed properly, which could result in serious injury or death to the vehicle's driver or front
passenger.

>B< POST-INSTALLATION INSPECTION

1. Turn the ignition key to the "ON" position.
2. Does the "SRS" warning light illuminate for about 7 seconds, and then remain off for at least 5 seconds after turning off?
3. If yes, SRS system is functioning properly. If no, refer to Troubleshooting.

Relays and Modules - Starting and Charging > < Air Bag Control Module|Locations|Page 184