Diamante V6-3.5L SOHC (2003)
Alternator Relay: Testing and Inspection
GENERATOR RELAY CONTINUITY CHECK
MEASUREMENT METHOD
1. Remove the generator relay from the relay box inside the engine compartment.
2. Set the circuit tester to the Ohm range and check that there is continuity when the (+) terminal of the tester is connected to terminal 4 of the
generator relay and the (-) terminal is connected to terminal 2.
3. Next, check that there is no continuity when the (+) terminal is connected to terminal 2 and the (-) terminal is connected to terminal 4.
4. If the continuity checks in steps 2 and 3 show a defect, replace the generator relay.