Diamante V6-3.5L SOHC (2003)
3. Place three old tires with no wheels on top of the tire secured to the air bag module.
<Air bag module (front passenger's side)>
1. Connect the deployment wires to the SRS air bag adaptor harness A, pass it beneath the tire and wheel assembly, and connect it to the air
bag module.
2. Pass thick wires into the hole of the air bag module bracket, and secure it to the wheel of an old tire and wheel (4 locations), with the air
bag facing upwards.
CAUTION: Leave some space below the wheel for the deployment wires.
If there is no space, the reaction of the air bag deployment could result in damage of the adaptor harness.
CAUTION: While deployment takes place, do not have the connector of the SRS air bag adaptor harness A inserted between the tires.
3. Place four old tires without wheels on top of the tire secured to the air bag module, and secure all tires with ropes (4 locations).
5. At a location as far away from the air bag module as possible, and from a shielded position, disconnect the two connected wires from each other,
and connect them to the two terminals of the battery (which has been removed from the vehicle) to deploy the air bag.
