Diamante V6-3.5L SOHC (2003)
Rotor: Testing and Inspection
Rotor
Rotor
ROTOR
1. Check rotor coil for continuity. Check to ensure that there is no continuity between slip rings. If resistance is too small, it means that there is a
short circuit. If there is no continuity or if there is a short circuit, replace rotor assembly.
Resistance value: Approx. 3 - 5 Ohm
2. Check rotor coil for grounding. Check to ensure that there is no continuity between slip ring and core. If there is continuity, replace rotor assembly.