Diamante V6-3.5L SOHC (2003)
<<A>> TIE ROD REMOVAL
<<B>> RACK SUPPORT COVER
1. Scribe a mark across the surface of the rack support cover and the rack housing.
2. Remove the lock nut.
3. Remove the rack support cover.
<<C>> PINION AND VALVE ASSEMBLY
1. Using a plastic hammer, gently tap the pinion to remove it.
<<D>> SEAL RING
1. Cut the seal ring and remove it from the pinion and valve assembly and the rack.
NOTE: Take care not to scratch the pinion and valve assembly, or the rack assembly when cutting the seal ring.
<<E>> UPPER BEARING/UPPER OIL SEAL