mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Front Tire - Scraping Noise|Page 4856 > < Front Tire - Scraping Noise|Page 4854
Page 2
background image

WARRANTY INFORMATION

Splash Shield Modification
Nature Code: 99D

Cause Code: 990

Labor Operation No. 422025H1

Time Allowance: 0.2 hr. per side

Warranty Coverage: 36 months/36,000 miles.
Special Warranty In formation: To be performed on an as-needed basis only.

Technical Service Bulletin # 98-42A-002

Date: 980301

Front Tire - Scraping Noise

No.: TSB-98-42A-002
DATE: March, 1998
MODEL: 1997-98 Diamante

SUBJECT: 
FRONT TIRE SCRAPING NOISE

PURPOSE
A scraping noise may be heard when traveling at speeds below 5 mph, due to the front tire rubbing against the splash shield, particularly on the front
driver's side.

To eliminate the noise, follow the repair procedure in this bulletin to modify the front inner fender splash shield to prevent contact with the tire.

AFFECTED VEHICLES
1997-98 Diamante

PROCEDURE

1.

Raise and support the front of the vehicle.

2.

Remove the tire and wheel assembly.

3.

Remove the two screw fastener assemblies attaching the splash shield to the under cover panel.

Front Tire - Scraping Noise|Page 4856 > < Front Tire - Scraping Noise|Page 4854