Diamante ES Sedan V6-3.5L SOHC (1997)
A. Snap ring removal. (9)
ASSEMBLY
Assembly in reverse order as Disassembly.
NOTE: Assembly service points as follows:
A. D-Ring installation. (11, 14, 16, 18 & 19)
Apply Automatic Transmission Fluid (ATF), blue petroleum jelly or white Vaseline to D-ring, and install carefully.
B. Reverse clutch piston installation. (15)
Align the outer circumference holes (parts A and B) of the reverse clutch piston and the reverse clutch retainer to assemble them.
C. Snap ring installation. (9)
1. Use the special tool to install the snap ring.
2. Check that the clearance between the snap ring and the return spring retainer is within the standard value. When measuring the clearance,
press the return spring retainer by the weight of 49 N (11 lbs.) evenly. If not within the standard value, select a snap ring to adjust.
Standard value: 0 - 0.09 mm (0 - 0.0035 inch)
