mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Removal and Installation Steps|Page 4164 > < Removal and Installation Steps
Page 1
background image

Radio/Stereo: Service and Repair
Security Code For Radio and Tape Player With Anti Theft System

Security coding for audio Systems

The audio system will not operate (even if the power supply is restored) if any of the following conditions occur:

-

The battery is discharged.

-

The fuse is blown.

-

Power supply from the battery has been interrupted (battery disconnected, radio unit stolen etc.).

The audio unit security code must be entered as outlined below to obtain audio operation.

NOTE:

(1) The security code is indicated on the cards supplied to you when you purchased your vehicle or replaced the audio system.
(2) If you lose the cards, call the nearest authorized dealer.
(3) When you sell your vehicle or trade it in, please deliver the cards together with the vehicle
.

CAUTION:  You are furnished with two cards in the glove compartment. Keep them separate from each other in appropriate places not in the
vehicle
.

Security code input procedure

1- Return the power supply from the battery to the normal condition.
2- Place the ignition key in the ACC" position.
3- Press the button (1), and "codE" will be shown on the display (2).
4- Press NO.1 through NO.4 memory select buttons (3) to set the four-digit security code indicated on the card Every time each digit key is pressed,

the figure changes as follows:

Removal and Installation Steps|Page 4164 > < Removal and Installation Steps