Diamante Sedan V6-3.5L SOHC (1999)
Accelerator Pedal Position Sensor: Testing and Inspection
With TCL
ACCELERATOR PEDAL POSITION SENSOR CHECK (Vehicles with TCL)
1. Disconnect the accelerator pedal position sensor connector.
2. Measure the resistance between the accelerator pedal position sensor side connector terminal 1 and terminal 4.
Standard value: 3.5 - 6.5 kOhms
3. Measure the resistance between the accelerator pedal position sensor side connector terminal 1 and terminal 2.
Normal Condition:
4. If the resistance is outside the standard value, or if it doesn't change smoothly, replace the accelerator pedal position sensor.
