Diamante Sedan V6-3.5L SOHC (1999)
Temperature Sensor (Gauge): Testing and Inspection
1. Drain the engine coolant.
2. Remove the engine coolant temperature gauge unit.
3. Immerse the unit in 70° C (158° F) water to measure the resistance.
Standard value: 104 ±13.5 Ohms
4. After checking, apply the specified sealant around the thread of engine coolant temperature gauge unit.
Specified sealant:
3M Adhesive Nut Locking No.4171 or equivalent
5. Add engine coolant.