Diamante Sedan V6-3.5L SOHC (1999)
Air Bag(s) Arming and Disarming: Vehicle Damage Warnings
If the SRS components are to be removed or replaced as a result of maintenance, troubleshooting, etc., follow each procedure. (SRS Air Bag Control
Unit, Air Bag Modules and Clock Spring.)
CAUTION:
1. SRS components should not be subjected to heat over 93° C (200° F), so remove the SRS-ECU, air bag modules, clock spring and
pretensioner-fitted Seatbelts before drying or baking the vehicle after painting.
Recheck SRS airbag system operability after re-installing components.
2. If the SRS components are removed for the purpose of check, sheet metal repair, painting, etc., they should be stored in a clean, dry place until
they are reinstalled.