Diamante Sedan V6-3.5L SOHC (1999)
1. Negative (-) Battery Cable Disconnection
Disconnect the negative battery cable from the battery and tape the terminal.
CAUTION: Wait at least 60 seconds after disconnecting the battery cable before doing any further work.
2. Air Bag Module Removal (driver's Side)
NOTE: When disconnecting the connector of the clock spring from the air bag module, press the air bag's lock toward the outer side to spread it
open. Use a flat-tipped screwdriver, prying gently, to remove the connector
CAUTION:
-
When disconnecting the air bag module-clock spring connector, take care not to apply excessive force to it.
-
The removed air bag module should be stored in a clean, dry place with the pad cover face up.
3. Clock Spring Removal.
a. Remove Weight.
b. Remove Steering Wheel.
CAUTION: Do not hammer on the steering wheel. Doing so may damage the collapsible column mechanism.
c. Remove Instrument Lower Panel.
d. Remove Column Cover Lower.
e. Remove Clock Spring.
CAUTION: The removed clock spring should be stored in a clean, dry place.
CAUTION: Dispose of air bag modules only according to the specified procedure.
INSTALLATION