mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Sensors and Switches - Brakes and Traction Control > < Removal/Installation|Page 3704
Page 1
background image

ABS Main Relay: Service and Repair

    On models equipped with airbag, disarm airbag as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.

1.

Remove ECU electrical connector mounting screws, then the ECU.

2.

Remove the A.B.S. power relay, located under the lefthand side of the instrument panel.

3.

Reverse procedure to install.

Sensors and Switches - Brakes and Traction Control > < Removal/Installation|Page 3704