mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Sensors and Switches - Engine > < Diagram Information and Instructions|Page 1630
Page 1
background image

Thermostat Gasket: Technical Service Bulletins
Cooling System - Water Outlet Fitting Gasket Change

SUBJECT:

SPECIFICATION CHANGE TO WATER

OUTLET FITTING GASKET
NO.

TSB-90-14-001

DATE December, 1990

MODELAll 1990-91 except 3000GT and Precis
TSB Revision TSB 90-14-001

PURPOSE

This bulletin describes a production change in materials and installation of the water outlet fitting gasket used on several models.

Figure 1.

Figure 2.

DESCRIPTION

The water outlet fitting gasket has been changed from a joint-sheet material (fiber) to a rubber-coated metal design. Because of this modification, the
new gasket has a top side and a bottom side. The top side is labeled with an "UP" mark. The bottom side is unlabeled. When installing the new gasket,
make sure the "UP" mark is facing the water outlet fitting side. If using the previous style fiber gasket, either side may be installed on top. Refer to
Figures 1 and 2.

AFFECTED MODELS

1990 Eclipse; 1990 Galant; 1990-91 Mirage; 1990 Montero; 1990 Sigma; 1990-91 Truck; 1990-91 Van/Wagon.

PARTS INFORMATION

The new gasket (MD143639) is available through your local Parts Distribution Center.

Sensors and Switches - Engine > < Diagram Information and Instructions|Page 1630