Eclipse L4-1795cc 1.8L SOHC (1990)
4. Check the output Voltage of the TPS.
Voltage
0.48 - 0.52 VDC
If necessary, adjust the TPS by loosening the mounting screws and rotating the sensor. Clockwise rotation of the sensor increases the Voltage
output while counter-clockwise rotation reduces Voltage.
5. Tighten the sensor set screws securely.
6. Turn the ignition switch OFF.
7. Disconnect the battery for at least ten seconds to clear any stored trouble codes.
8. If the throttle cable was previously loosened, return the cable to the proper adjustment.
