mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Fuel Rail > < Control Relay (Fuel Pump Control)|Page 2728
Page 3
background image

Continuity:

Should not exist.

10. Using an Ohmmeter, check for continuity between the fuel pump harness terminal 2 and ground.

Continuity:

Should not exist.

11. Using an Ohmmeter, check for continuity between the control relay terminal 1 and the fuel pump connector 2.

Continuity:

Should exist.

If any of the previous tests produce unsatisfactory results, the harness will need to be repaired or replaced. Once repairs have been completed, clear
the trouble codes and road test the vehicle to confirm that the repair has corrected the problem and the code doesn't return.
If the trouble code returns, it is possible that there is an intermittent failure of the component or the ECU. Check for looseness at all harness
junctions and test for an intermittent failure. If the same trouble code reoccurs, the ECU will need to be changed.

Fuel Rail > < Control Relay (Fuel Pump Control)|Page 2728