Eclipse L4-1795cc 1.8L SOHC (1990)
Disc Installation Procedure
22. Install the spacer on the distributor shaft.
23. Insert the disc into the sensor part of the pick up unit assembly insuring the proper alignment with the notch on the spacer.
NOTE:Take care to install the disc with the correct side to the top as was observed during disassembly. Insure that the disc is clean and that the
disc's slits are clear of any foreign matter.
24. Install the rotor shaft and its retaining screw.
25. Install the cover so that the cover's indentation "A" is aligned with the housing's notch "B".
