Eclipse L4-1795cc 1.8L SOHC (1990)
b.
Reach behind the support bracket and locate the A/C harness. Push out the blind cap and disconnect the harness from the blind cap.
FIGURE 13
c.
While holding the A/C harness, partially insert the A/C switch into the heater control panel and connect the harness. Then lock the A/C switch
into the heater control panel.
Make sure that the switch is properly positioned.
Reinstall the following parts that were temporarily removed:
a: Reinforcement b: Glove Box c: Under Cover (Only for Equipped Models) d: Replace side panel, screws, and caps.
