Eclipse L4-1795cc 1.8L SOHC (1990)
12. INSTALLATION OF BEARING CAP
(1) Install the bearing caps with their arrow mark directed toward the timing belt side of engine. Cap numbers must be in correct order.
(2) Tighten cap bolts in the sequence of center, No.2, No.4, front and rear cap bolts.
(3) Cap bolts should be tightened evenly in 2 to 3 steps before they are finally tightened.
(4) Make certain that the crankshaft turns freely and has a proper end play by checking the clearance between center main bearing thrust flange
and connecting rod big end bearing.
Crankshaft end play:
0.05-0.18 mm (.0020-.0071 in.)
Limit: 0.25 mm (.0098 in.)
9. INSTALLATION OF REAR OIL SEAL
Install oil seal in the crankshaft rear oil seal case. Using the special tool, press fit the oil seal all the way in without tilting it.
