Eclipse L4-1996cc 2.0L DOHC (1995)
CAUTION: Do not use sandpaper coarser than 600 grit.
5.
Remove all sanding dust. Clean the exterior again with mild soap and water, then with wax and grease remover.
6.
Mask all areas which will not be painted.
7.
Tack all areas that will be painted.
8.
Apply the appropriate two-component basecoat/clearcoat material. Follow the manufacturer's instructions for application, drying and curing.
9.
After curing is complete, finesse sand to remove any dirt or surface imperfections. Polish with the finest grade compound or glaze to finish the
surface.
10.
Reinstall the trim parts that were removed in Step 1.
WARRANTY INFORMATION
Refer to Warranty Bulletin WB95-007, which contains specific instructions for submitting claims for this repair.
