Eclipse L4-1996cc 2.0L DOHC (1995)
ABS Light: Testing and Inspection
ABS WARNING LIGHT INSPECTION
Check that the ABS warning light illuminates as follows.
1. When the ignition switch is turned to "ON", the ABS warning light illuminates.
2. When the ignition switch is turned to "START", to start the engine, the ABS warning light switches off after approx. 1 second.
3. If the illumination is other than the above, check the diagnostic trouble codes.
INSPECTION CHART FOR TROUBLE SYMPTOMS
Get an understanding of the trouble symptoms and check according to the inspection procedure chart
CAUTION:
1. If steering movements are made when driving at high speed, or when driving on road surfaces with low frictional resistance, or when
passing over bumps, the ABS may operate even though sudden braking is not being applied. Because of this, when getting information
from the customer, check if the problem occurred while driving under such conditions as these.
2. During ABS operation, changes in the feeling of the brake pedal (vibration may occur or pedal may not be able to be depressed). Such
changes are due to intermittent changes in hydraulic pressure inside the brake line to prevent the wheels from locking, and is
considered normal.
