Eclipse L4-1996cc 2.0L DOHC (1995)
On some early production 1995 Eclipses with ABS, the ABS hydraulic unit (HU) support may develop a stress crack after several years of vehicle use.
This can cause the ABS HU to dislodge from its bracket, damaging the hydraulic lines. This condition can occur on some early production 1995 Eclipses
with ABS, shipped on or before July 22, 1994. Some units may have already been repaired as directed by ATIN-94-35-001. To correct this condition,
two reinforcement brackets must be installed in front of the ABS HU, on the HU support.
AFFECTED VEHICLES
Some 1995 Eclipse vehicles equipped with ABS distributed to dealers on or before July 22, 1994.
REQUIRED OPERATIONS
1.
Install two reinforcement brackets in front of the ABS HU.
PARTS INFORMATION
The parts required for this procedure (Bracket A, p/n MR217014; Bracket B, p/n MR217015) are not stocked in the PDCs. Securing Bolt, p/n
MS240126, is also required for bracket installation. If the quantity of parts supplied with ATIN-94-35-001 was not sufficient, please contact your
District Service Manager regarding additional parts.
WARRANTY INFORMATION
Submit as Recall Claim Type "C", Menu option "E-5" on your Diamond Network System. Do not submit as a "W" claim.
Required Operation
Campaign Labor Operation: C9501KXX
Labor Time Allowance: 1.0 hours
No parts are allowed to be entered on the claim.
