Eclipse L4-1996cc 2.0L DOHC (1995)
Coolant Line/Hose: Service and Repair
REPLACEMENT
1. Refer to the illustration for the service procedure, noting the following:
2. Drain the engine coolant.
3. Remove the under cover. Refer to Body and Frame.
4. Reverse the procedure to install, noting the following:
5. Cover the vehicle speed sensor (M/T) with a shop towel before removing a heater hose, because the sensor is below the hoses.
6. After making mating marks on the radiator lower hose and the hose clamp, disconnect the radiator hose.