mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Recall - Aspirator/Fuel Pressure Regulator|Page 3509 > < Recall - Aspirator/Fuel Pressure Regulator|Page 3507
Page 8
background image

NOTE:

A PCM reprogramming cartridge (MIT992016) will be sent to each dealership for use in completing this Emissions Recall Campaign.

*NOTE

If the vehicle your are repairing has an OLD PCM part number that is different from the ones listed in the Remarks column of the Parts Information
chart, then the PCM should be reprogrammed. DO NOT replace the PCM unless the one in the vehicle has one of the listed old part numbers. 

CAMPAIGN CLAIM INFORMATION (Submit as RECALL CLAIM only)

Inspect Fuel Pressure Regulator, Remove Aspirator System, and Reprogram or Replace PCM
Campaign Labor Operation No. C9808KXX (For All Vehicles) Time Allowance: 0.6 hrs.

Replace Fuel Pressure Regulator, Remove Aspirator System, and Reprogram or Replace PCM
Campaign Labor Operation No. C9808KXX (For All Vehicles) Time Allowance: 0.9 hrs.

Allowable Parts: Refer to the PARTS INFORMATION section of this bulletin. Replaced/Removed Parts Retention Period: All replaced and removed
recall parts must be retained for the normal warranty parts storage and retention period of 30 days past the end-of month paid statement date. Parts may
be inspected by your District Service Manager and/or requested by MMSA Warranty Dept. for return. DO NOT scrap parts earlier than the specific
policy time period.

Recall - Aspirator/Fuel Pressure Regulator|Page 3509 > < Recall - Aspirator/Fuel Pressure Regulator|Page 3507