mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

PCM - Reprogramming & Part Number Reference Guide|Page 123 > < Diagram Information and Instructions|Page 112
Page 1
background image

Engine Control Module: All Technical Service Bulletins
PCM - Reprogramming & Part Number Reference Guide

No: TSB-99-13-001
DATE: February, 1999
MODEL: 1995-98 Eclipse 

SUBJECT:
PCM REPROGRAMMING & REPLACEMENT SUMMARY (420A ENGINE)

PURPOSE

This bulletin contains quick-reference charts for 420A powertrain control module (PCM) reprogramming and replacement information for 1995-98
models. This information summarizes information printed in several Technical Service Bulletins.

Refer to the appropriate Technical Service Bulletin referenced in the charts in this bulletin.

^

For 1995 models, see the charts.

^

For 1996 models, see the chart.

^

No Technical Service Bulletins were issued for 1997 model year PCM reprogramming or replacement.

^

For 1998 models, see the chart.

AFFECTED VEHICLES

1995-98 Eclipse models equipped with 2.0L non-turbocharged 420A engine

1995 Model Year

The PCM may require replacement or reprogramming under the following conditions:

^

DTC 46, 111, 113, or 126 is set

^

Engine stall during warm-up

^

Rough idle

^

Sudden rpm rise when A/C is turned on

^

Increased throttle effort from idle

^

Purge control valve ticking noise at idle

^

Long restart after stall in cold ambient temperatures

^

On M/T models, surge under light throttle or sudden rpm drop after clutch release

Models produced before 6/16/94 (VIN SE027236)

PCM - Reprogramming & Part Number Reference Guide|Page 123 > < Diagram Information and Instructions|Page 112