Eclipse L4-1996cc 2.0L DOHC (1995)
Alignment: Service and Repair
Front Wheel Alignment
Camber
Camber is preset during production and is not adjustable. If camber is out of specification, replace bent or damaged components as necessary.
Caster
Caster has been preset during production and is not adjustable.
Toe-In
Fig. 1 Front Toe-In Adjustment
1. Adjust toe-in by loosening clips and turning left and right tie rod turnbuckles equally in opposite directions. Refer to Fig. 1.
2. To increase toe-out, turn left turnbuckle toward front of vehicle and right turnbuckle toward rear of vehicle. To increase toe-in, turn turnbuckles in
other direction.
3. Toe-in adjustment should be 0.24 inch for each half turn of left and right tie rods.