mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Removal/Installation|Page 4683 > < Oil Pump Relief Pressure Inspection|Page 4680
Page 1
background image

Power Steering Pump: Service and Repair
Removal/Installation

Fig. 40 Power Steering Pump Removal

Remove steering pump in numbered sequence, Fig. 40 noting the following:

1. Remove reservoir cap and disconnect return hose to drain fluid.
2. Raise and support vehicle.
3. Cover alternator (located under oil pump) if any hoses are removed.
4. Reverse procedure to install, ensuring to install oil pump in a position towards the front of the bracket, and adjust the belt tension using the air

conditioning tension pulley.

Removal/Installation|Page 4683 > < Oil Pump Relief Pressure Inspection|Page 4680