Eclipse L4-1997cc 2.0L DOHC (1991)
Brake Pad: All Technical Service Bulletins
Brakes - Pad Installation Service Points
NO.: TSB-92-35-003
DATE: March, 1992
MODEL: All
SUBJECT:
BRAKE PAD INSTALLATION
SERVICE POINTS
PURPOSE
This Technical Service Bulletin emphasizes the need to perform certain procedures during the front (and on some vehicles, the rear) brake pad
installation.
AFFECTED VEHICLES
Front brake pad installation:
All vehicles.
Rear brake pad installation:
1990-92 Eclipse and 1989-92 Galant
(only those with 4-wheel disc brakes).
DESCRIPTION
Front Brake Pad Installation
When replacing front brake pads, apply a thin layer of high temperature brake grease (supplied with the brake pad kit) to coat the brake pad backing
plate. Refer to the illustration below for the locations where brake grease should be applied.
CAUTION:
BE CAREFUL NOT TO GET ANY GREASE ON THE FRICTION SIDE OF THE PAD.
For further information on the application of brake grease, refer to page 6 of Technical Service Bulletin number TSB-91-35-004 and Group 35 of the
applicable service manual. Technical Service Bulletin number TSB-91-35-004 also contains important information regarding the elimination of front
brake judder on 1990-91 Eclipses and 1989-91 Galants.
Rear Brake Pad Installation
