Eclipse L4-1997cc 2.0L DOHC (1991)
SERVICE POINTS OF REMOVAL
3. Removal of engine mount bracket.
(1) With a wooden block placed against the oil pan part of the engine, jack up the vehicle.
Caution: Jack up gently, so as not to apply a load to the various parts.
(2) Remove the engine mount bracket.
5. Removal of drive belt (alternator).
Before removing the drive belt, loosen the water pump pulley mounting bolts.
21. Removal of auto tensioner.
(1) Turn the crankshaft clockwise and align the timing marks so as to bring the No.1 cylinder to compression top-dead-center position. At this time
the timing marks of the camshaft sprocket and the upper surface of the cylinder head should coincide, and the dowel pin of the camshaft
sprocket should be at the upper side.
Caution: The crankshaft must always be rotated clockwise.
(2) Remove the auto tensioner
22. Removal of timing belt.
