Eclipse L4-1997cc 2.0L DOHC (1991)
Install the crankshaft sprocket "B" as shown while paying attention to its direction.
35. Installation of spacer.
(1) Apply a thin coat of engine oil to the outer circumference of the spacer.
(2) Install the spacer with the chamfered end facing the oil seal.
NOTE: If the spacer is installed adversely, the oil seal may be damaged, resulting in the oil leaks.
33. Installation of timing belt " B."
(1) Ensure that crankshaft sprocket "B" timing mark and the silent shaft sprocket timing mark are aligned.
(2) Fit timing belt "B" over crankshaft sprocket "B" and the silent shaft sprocket. Ensure that there is no slack in the belt.
-
Adjustment of timing belt "B" tension.
(1) Temporarily fix the timing belt "B" tensioner such that the center of the tensioner pulley is to the left and above the center of the installation
bolt, and temporarily attach the tensioner pulley so that the flange is toward the front of the engine.
