Eclipse L4-1997cc 2.0L DOHC (1991)
(3) Set a timing light in position.
(4) Ground the terminal for adjustment of ignition timing.
(5) Start the engine and let it idle.
(6) Check whether or not the ignition timing is the standard value; if not, adjust.
Standard value: 5° BTDC
(7) Stop grounding the terminal for adjustment of ignition timing.
(8) Let the engine idle for two minutes.
(9) Check the idling rpm.
Curb idle speed: 750 ± 1OO rpm
NOTE: The idling rpm is automatically regulated by the idle speed control system.
(1O) If not within the standard value range, refer to Diagnosis By Symptom under Computers and Control Systems.
If no fault is found, refer to Adjustments.
