mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Diagnostic Connector - Fuel Pump|Locations > < Fuel - Pump Check Connector, Manual Update|Page 2984
Page 3
background image

TYPICAL SERVICE MANUAL UPDATE

As shown below cross "X" out the fuel pump check connector information and write in "REFER TO TSB-91-13-012 FOR FUEL PUMP CHECK
CONNECTOR DIAGRAM"

FUEL PUMP ACTIVATING PROCEDURE

(some early 1991 Eclipse vehicles without a fuel pump check connector)

1. Remove the right side console cover.

2. Disconnect the MPI control relay.

3. Connect a 12 volt power source to the harness side connector of the MPI control relay to activate the fuel pump.

Diagnostic Connector - Fuel Pump|Locations > < Fuel - Pump Check Connector, Manual Update|Page 2984