Eclipse L4-1997cc 2.0L DOHC (1991)
12. Using an ohm meter, check for continuity between ECU harness terminal 68 and ground.
Continuity
Should not exist
13. Using an ohm meter, check for continuity between ECU harness terminal 67 and ground.
Continuity
Should not exist
If any of the previous tests produce unsatisfactory results, the harness will need to be repaired or replaced. Once repairs have been completed, road
test the vehicle to confirm that the repair has corrected the problem.
If the same problem reoccurs, it is possible that there is an intermittent failure of the component or the ECU. Check for looseness at all harness
junctions and test for an intermittent failure.
