Eclipse L4-1997cc 2.0L DOHC (1991)
Power Steering Valve: Service and Repair
Fig. 24 Replacing Rear Power Cylinder Control Valve
1.
Raise and support vehicle.
2.
Clean steering system piping using suitable steam cleaner or equivalent.
3.
Drain steering system fluid into a suitable container.
4.
Remove the rear suspension assembly as outlined under REAR SUSPENSION/COMPONENT REPLACEMENT AND REPAIR
PROCEDURES/REAR SUSPENSION ASSEMBLY.
5.
Replace control valve and related components in numbered sequence shown in Fig. 24.
6.
Reverse procedure to install, bleeding the 4 Wheel Steering (4WS) system as outlined under MAINTENANCE PROCEDURES/BLEEDING
SYSTEM/FOUR WHEEL STEERING.
