Eclipse L4-1997cc 2.0L DOHC (1991)
Fig. 5 Disassembling Shock Absorber Assembly. Eclipse
Fig. 5 Disassembling Shock Absorber Assembly. Eclipse
3.
Disassemble shock absorber assembly in numbered sequence shown in Figs. 5 and 6, noting the following:
a. Before removing piston rod nut, compress coil spring using suitable coil spring compression tool.
b. While holding piston rod, remove piston rod nut.
4.
Reverse procedure to assemble and install, noting the following:
a. Use a suitable coil spring compression tool to compress spring and insert coil spring on shock absorber.
Fig. 7 Installing Coil Spring