Eclipse L4-1997cc 2.0L DOHC (1991)
2-4 N-m (1.5-3 ft.lbs.). Retest the window operation.
3.
If the window operates normally, reassemble the door panel trim and return the vehicle to the customer. (Refer to the NOTE under Procedure A.)
If the window is still difficult to operate, go to PROCEDURE F.
Procedure F: Window Regulator To Door Adjustment
1.
With the window rolled down 6 inches, loosen the four bolts holding the window regulator to the door. Move the window straight back (not
down), making sure it remains seated in the rear runchannel. Retighten the four window regulator bolts 2-4 N-m (1.5-3 ft.lbs.).
2.
Retest the window operation. If the window operates normally, reinstall the door panel trim and return the vehicle to the customer. (Refer to the
NOTE under Procedure A.) If the window is still difficult to operate, go to Step 3.
3.
Remove the two lower bolts holding the window regulator to the door.
