mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Wiper and Washer Systems > < Window - Door & Glass Adjustment|Page 5128
Page 6
background image

4.

Reinstall the two lower regulator bolts with a 1.6 mm thick washer on each bolt. The washer must be placed between the regulator and the door.
Torque the lower regulator bolts 2-4 N-m (1.5-3.0 ft.lbs.).

5.

Retest the window operation, reinstall the door panel trim, and return the vehicle to the customer. (Refer to the NOTE under Procedure A.)

This is the extent of adjustment procedures that can be performed to reduce door window binding or misalignment. Most conditions affecting normal
door window operation will be reduced or eliminated by following the procedures described in this bulletin.

Parts And Warranty Information

If window regulator replacement is necessary, order parts from your facing PDC on a stock or daily order basis. Window regulator part numbers are:

Part Number

Description

MB517771

Window Regulator, Standard, Left Side

MB517772

Window Regulator, Standard, Right Side

MB517773

Window Regulator, Power, Left Side

MB517774

Window Regulator, Power, Right Side

WARRANTY INFORMATION

OPERATION NUMBER:42412100

POSITION CODE:

424121

NATURE CODE:

85D

CAUSAL CODE:

450

LABOR TIME ALLOWANCE:
Actual time, up to:
0.5 hrs. (one side) or
1.0 hrs.(both sides).
PWA is required if time
allowances are exceeded.

WARRANTY COVERAGE:
12/12 Adjustment Warranty

Wiper and Washer Systems > < Window - Door & Glass Adjustment|Page 5128