Eclipse L4-1997cc 2.0L DOHC Turbo (1990)
(2) After installing the bearing caps, make sure that the crankshaft turns smoothly and the end play is correct. If the end play exceeds the limit,
replace crankshaft bearings.
Standard value: 0.05-0.18 mm (.0020-.0071 in.)
Limit: 0.25 mm (.0098 in.)
10. INSTALLATION OF OIL SEAL
Using the special tool, press-fit the oil seal into the crankshaft rear oil case. Use a new oil seal.
9.
INSTALLATION OF OIL SEPARATOR
Force the oil separator into the oil seal case so that the oil hole in the separator is directed downward (arrow in illustration).