Eclipse L4-1997cc 2.0L DOHC Turbo 16 Valve (1996)
3. Using the special tool, install a new stem seal to the valve guide.
NOTE: Improper installation can be a cause of leakage of oil down into the cylinder.
4. Install the valve spring so that its end with identification color is positioned on the rocker arm end.
5. Do not compress the valve spring excessively, or the bottom end of the retainer will damage the stem seal.
NOTE: When installing the cylinder head bolts, the length below the head of the bolts should be within (A): 99.4 mm (3.91 inch). If it is outside
(A): 99.4 mm (3.91 inch), replace the bolts.
6. Apply engine oil to the bolt thread and the washer.