Eclipse L4-1997cc 2.0L DOHC Turbo 16 Valve (1996)
3. Turn the crankshaft two revolutions clockwise so that the timing marks are aligned. After leaving it for 15 minutes, measure the amount of
protrusion of the auto tensioner.
Standard value (A): 3.8-4.5 mm (0.150-0.177 in)
4. If the amount of protrusion is outside the standard value, repeat the operation in steps (1) to (3).
5. Check again that the timing marks of each sprocket are aligned.
D. TIMING BELT FRONT LOWER COVER / TIMING BELT FRONT CENTER COVER / TIMING BELT FRONT UPPER COVER
INSTALLATION
Timing Belt B (Silent Shaft Belt)
