Eclipse L4-1997cc 2.0L DOHC Turbo 16 Valve (1996)
INSTALLATION SERVICE POINTS
>A< TURBOCHARGER ASSEMBLY INSTALLATION
(1) Clean the alignment surfaces shown in the illustration.
(2) Supply clean engine oil through the oil pipe installation hole of the turbocharger assembly.
CAUTION: When cleaning, take care that no foreign material gets
into the engine coolant or oil passages hole.
>B< CONED DISC SPRING/FLANGE NUT/FLANGE BOLTS INSTALLATION
(1) Install the coned disc spring in the shown direction.
(2) Tighten the flange nuts and bolts to 27 - 31 Nm (20 - 23 ft.lbs.).
(3) Use the special tool to further tighten by 60° - 70°.
