Eclipse L4-1997cc 2.0L DOHC Turbo 16 Valve (1996)
b. Holding the timing belt "B" tensioner up with your finger in the direction of the arrow, place pressure on the timing belt so that the tension
side of the belt is taut. Now tighten the bolt to fix the tensioner.
Caution: When tightening the bolt, ensure that the tensioner pulley shaft does not rotate with the bolt. Allowing it to rotate with the
bolt can cause excessive tension on the belt.
c. To ensure that the tension is correct, depress the belt (point A) with a finger. If not, adjust.
Standard value: 5-7 mm (0.20-0.28 in)
CRANKSHAFT SENSING BLADE INSTALLATION
-
When installing, make sure the direction is correct. See figure.
CRANKSHAFT SPROCKET INSTALLATION
-
Use the special tool to install the crankshaft sprocket and bolt.
NOTE: Apply a minimum amount of engine oil to the bearing surface and thread of the crankshaft bolt.
