Eclipse L4-1997cc 2.0L DOHC Turbo 16 Valve (1996)
1. Turn the two sprockets so that their dowel pins are located on top. Then, align the timing marks facing each other with the top surface of the
cylinder head. When you let go of the exhaust camshaft sprocket, it will rotate one tooth in the counterclockwise direction. This should be
taken into account when installing the timing belt on the sprockets.
NOTE: The same camshaft sprocket is used for the intake and exhaust camshafts. This is provided with two timing marks. When the sprocket
is mounted on the exhaust camshaft, use the timing mark on the right with the dowel pin hole on top. For the intake camshaft sprocket, use the
one on the left with the dowel pin hole on top.
2. Align the crankshaft sprocket timing marks.
3. Align the oil pump sprocket timing marks.
