mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Transmission Position Switch/Sensor, A/T > < Engine - Erratic Idle/Low Performance/MIL ON|Page 2587
Page 1
background image

Throttle Position Sensor: Service and Repair

REMOVAL

1. Disconnect the harness connector.
2. Remove the two mounting screws. 
3. Remove the sensor.

INSTALLATION

1. Install the sensor.
2. Install the two mounting screws.
3. Reconnect the harness connector.
4. Adjust the throttle position sensor.

Transmission Position Switch/Sensor, A/T > < Engine - Erratic Idle/Low Performance/MIL ON|Page 2587