Eclipse L4-1997cc 2.0L DOHC Turbo 16 Valve (1996)
Intake Air Temperature Sensor: Service and Repair
This component is built into the volume air flow sensor. If the intake air temperature sensor needs replacement the volume air flow sensor must be
replaced.
REMOVAL
1. Ensure that the ignition switch is in the "OFF" position, and disconnect the battery.
2. Remove the volume air flow sensor connector, on the air filter housing lid.
3. Release the clips holding the lid to the air filter housing.
4. Remove the lid with the volume air flow sensor attached.
5. Locate and remove the attachment bolts (to the lid) and remove the air flow sensor.
INSTALLATION
1. Attach the volume air flow sensor to the air filter housing lid.
2. Install the lid on the air filter housing.
3. Connect the volume air flow sensor connector.
4. Connect the battery.
